Hi, We era using Dolibarr since many years but as usual when our expert in official results see this kind of invoice whe face some problem
Remember an "acompte" is a amount of money payed to a supplyer as an advance. Of course this money is an income in the bank acount.
If you confirm or request this amount you do not establish an invoice but only an official confirmation of the amount received.
Problem : this kind of document "Facture d'acompte" is NOT an invoice and the notion of any tax VAT or other does not exist.
We suggest:
1. an evolution in order to change the label "Facture d'acompte" in "Acompte#
2. to return to the previous version of invoice in which the amount of acompte was removed from the total amount to be payed ( in fact removed from the TTC amount in the end of the invoice). The actual solution is not good even if the VAT is well calculated.
Thanks for your point of vue.
Alain
↧
Subject: "Factures d'acompte" - by: AlainG
↧
Subject: Bugs on User Rights! Can not see tasks on Project. - by: Knut
This issue apers only when you create a contact under add third party (add contacts / address) and creates a Dolibarr account for this connector supplied with the correct user rights then this user can not see the other's tasks under the project tab "tasks".
When you create a Dolibarr user from "user and groups" and set up user rights this work, and this user can see tasks correctly under the project tab "tasks".
http://www.dolibarr.org/images/fbfiles/files/user-20130408.jpg[/file] http://www.dolibarr.org/images/fbfiles/images/user-20130408.jpg
↧
↧
Subject: ÆØÅæøå on odt tempelet - by: Knut
There are a bug using ODT Tempelet and WYSIWYG editor.
the letters aren't printed out correctly se pictures!
http://www.dolibarr.org/images/fbfiles/images/tegn1.jpg
Result!
http://www.dolibarr.org/images/fbfiles/files/tegn2.jpg[/file] http://www.dolibarr.org/images/fbfiles/images/tegn2.jpg
↧
Subject: Rounding off - by: ilinaric
Hello,
I have Dolibarr 3.1.0. version.
When creating an invoice I have a total net price of 1.608,00.
VAT is 25% and using a calculator it's value is 402,00.
The Dolibarr calculates it to a value of 402,01!
How can I correct this?
Thanks in advance.
Regards!
↧
Subject: Few questions from a new user - by: icesream
I'm still trying to find a solution about having multiple sizes in products' stock but haven't figured any solution. Any ideas from anyone who has succeeded it? Thanks!
↧
↧
Subject: Modulo Fatture ITA - by: diciannove19
Gestione della ritenuta d'acconto e dell'esenzione IVA all'interno delle fatture fornitori. Il modulo si trova qui:
http://www.dolistore.com/modules/220-Fatture-Fornitori-ITA--FREE-.html (http://www.dolistore.com/modules/220-Fatture-Fornitori-ITA--FREE-.html)
↧
Subject: Missing graphics in statistics - by: JordiC
It started in 3.3.0, and the 3.3.1 update did not help.
In the financial menu / statistics, no graphics are built.
It is the same for Bills to thirds, or to providers.
My OS: Ubuntu 12.04
Version: Dolibarr 3.3.0 upgraded to 3.3.1.
Another strange but solved issue was no generation of PDF's.
Installing a prior version solved it.
I then upgraded to 3.3.0.
Congratulations to all the Dolibarr team for such a great program!
Merci!
Jordi, Barcelona
↧
Subject: How to read uploaded files on Dolicloud - by: billante
Hello forum,
Uploaded files on dolicloud how can it be accessed and read without first downloading the file?
I want to first of all be able to see the content of an uploaded file and afterwards decide if i want to download it to my system or not
Any body has the answer?
↧
Subject: Installing on IIS6 - PHP5.3 - SYSLOG_FILE error - by: FHenry
I think you use multicompany ?
I've just send a pull request to fix this. Check the last commi into Dolibarr 3.3
↧
↧
Subject: Multi currency - by: humphrey
Hi,
Did you read that ? http://www.dolibarr.org/forum/12-howto--help/20665-multi-currency-module?limit=10&start=10
Rgds.
↧
Subject: Missing graphics in statistics - by: JordiC
Solved!
Et voilà, merci Monsieur.
It is difficult to find the right files in Ubuntu.
conf.php is in /etc/dolibarr
but there is a conf.php.example in /usr/share/dolibarr/htdocs/conf
and the custom documents are in /var/lib/dolibarr/documents
but editing files outside the home folder is even more diffcult, you have to use sudo gedit, or gksudo nautilus, to edit or copy/paste files.
Anyway, as you said, the solution was to copy the includes folder.
I downloaded and extracted the dolibarr file from Sourceforge into the Downloads folder, executed gksudo nautilus, navigated to /usr/share/dolibarr/htdocs/, renamed the folder includes to includes_bak, and copied the complete includes folder from the extracted file into the htdocs folder.
And voilà, it works! It is nice to see some graphics again.
Strangely, the includes folder from the Ubuntu installation was much smaller than the one from the compressed file.
Anyway, merci beaucoup!
Jordi from Barcelona
↧
Subject: Ideías de layout/estilo - by: xmaxmex
Fale Galera,
Vocês poderiam postar o thema que estão desenvolvendo ? O tema está show de bola....
Estou na espera do downloads viu ;)
↧
Subject: Cancelled invoice not effecting stocks? - by: Denizar
I have my stock management set so that validated invoices trigger stock movement.
When I cancel an invoice, the stocks are not put back.
Is this a bug or a missing functionality of dolibarr?
Any help is appreciated. Thank you...
↧
↧
Subject: Create a proposal problem - by: helpfull
Hi humphrey,
thank you very much :o) thats it!
↧
Subject: products - by: humphrey
Hello,
Try to modify this setting then it may be fine:
Go to Home / Setup / Modules / Products
Then increase the value for "Max number of products in combos select lists" ... be careful, not sure that 0 is working as expected... !
Regards.
↧
Subject: Newbie questions on 'How to Do' - by: visionix
Hi,
We are a 3-4 year daily user of Dolibarr, but we have lost Adrien our IT Support guy (who was also French so it helped) a while back and need to make some changes. Can you help with the following:
Version 2.8.0
1. Need to change the Back-up path. (currently on the Dolibarr Svr itself) Tried in 'System Tools' but could not seem to locate a field to specify a path.
2. We are changing our domain name from www.nematron.net to www.nemavision.ipc and want to make this change in Dolibarr. is this a difficult process and where do I make the change. The Dolibarr App is on a stand-alone Server.
3 We also want to change the logo, address, etc on our stationary. Is this a difficult process. Can someone offer guidence?
Thanks for any help.
David
↧
Subject: Cancelled invoice not effecting stocks? - by: saxa
but this is not a very nice assumption in my opinion. There should be some popup asking you "Have you received the goods back ?" If yes it should increase the stoc, otherwise it should leave it as it is.
↧
↧
Subject: Company name overwrites address text - by: saxa
I'm still getting the overwrite of the persons contact name with the company name. This is in 3.3.1. See attached screenshot. http://www.dolibarr.org/images/fbfiles/images/overwrite.jpg http://www.dolibarr.org/images/fbfiles/files/overwrite.jpg
↧
Subject: Cancelled invoice not effecting stocks? - by: Denizar
I see. Most of the time we make a mistake printing the invoice and that is why we cancel the invoice. Even before sending any goods.
But since the invoice is printed on paper, it has to be recorded, sent to accountancy etc. So I can't just turn the invoice back into a draft.
For next versions of dolibarr it would be lovely to see an optional fix for this.
Also for cancelled invoices, the amount of the invoice is added to statistics and total htc for customers. But if it is cancelled, it should count as 0 monetary value for the company...
I am not sure if there is a problem with the way I use dolibarr.
When I print an invoice and make a mistake, what procedure should I carry so that
1. invoice is recorded (so I can search invoice ref and find info about cancelled invoice)
2. invoice doesn't count towards customers standing balance, or payments or facture statistics
3. it doesn't effect stock
What do you suggest?
↧
Subject: Exporting ~low stock level alert - by: ukpooka
Having been set a very low budget £00.00 this software for our small warehouse has been a real boon and I have managed to work out most of the issues I have had which is a real testament to the usability of the software to those responsible. Currently the only issue I have is how to export the stock levels that are below the minimum stock levels.
I have managede to export all the other information I need its just I also need to be able to print all those in alarm, below the minimum stock level.
Any help would be gratefully received.
↧